Apex Legends settings – scale back Apex Legends lag, settings to point out FPS and Ping

Apex Legends has a good array of video and different settings to customize between (or throughout) matches. And that’s nice; as a result of success in Apex Legends, like in any high-octane aggressive shooter, depends not simply upon talent and reflexes however on how nicely you’ll be able to really run the game. To that finish, our Apex Legends settings information will stroll you throguh the video part of the Apex Legends settings menu detailing every part you are able to do to eek out a couple of extra frames per second on your matches.

We’ll additionally go over one of the crucial outstanding causes of low FPS and lag in Apex Legends, with a easy repair for this subject; and information you thru the steps of displaying each your present FPS and your Ping in-game.

Performance and optimisation is all nicely and good, after all, however what for those who want extra info on the game itself and the way it works? The reply, expensive reader, is our Apex Legends tips/guide, filled with sensible suggestions and hyperlinks to all our different Apex Legends guides. So if you wish to find out about all of the spray patterns and stats of the totally different Apex Legends guns/weapons, otherwise you need to know the place to go for the perfect Apex Legends loot, we’ve obtained the solutions.

Apex Legends settings information – specs and greatest efficiency

Guide Contents

Apex Legends specs – minimal & really helpful system necessities

It could be tough whenever you first begin taking part in a brand new game to know precisely what you’ll be able to anticipate from each the game itself and the system you might be operating it on. To assist with this, we’ve put collectively an inventory of the minimal and really helpful specs for operating Apex Legends in your desktop or laptop computer. So so long as your specs are someplace on this vary or greater, try to be good to go.

Apex Legends settings for greatest efficiency

Now let’s go over all of the video settings for Apex Legends. You can entry this menu each from the principle menu – by clicking the cog icon within the bottom-right nook – or in-game, by hitting “ESC” and deciding on Settings. From right here, navigate to the video tab, which is the fourth tab alongside on the high of your display screen.

Below we’ve listed every of the video settings you’ll be able to change, and the influence this will have in your game expertise and in your body charge.

• Display Mode – units the game to run full-screen, borderless window or run in a window.
  • This is a matter of circumstance and desire, however we’ve discovered operating in full-screen to offer you a touch sooner body charge total.
• Aspect Ratio – units the facet ratio of your show.
  • Set this to the native facet ratio of your monitor to keep away from stretching the game picture.
• Resolution – units the element of the game display screen.
  • Turning down your decision is a surefire technique to acquire a major FPS increase, however you’ll clearly lose out within the high quality of the picture, and it’s essential see what’s happening in a game like Apex Legends. We’d recommend optimising all different settings first, and for those who nonetheless aren’t reaching your required body charge then you’ll be able to attempt reducing the decision.
• Field of View – how zoomed-out the view seems by default.
  • Apex Legends warns towards setting the FOV above 90 as a result of it “may impact performance or cause visual issues”. As far as we all know, the one subject that this causes is that the sniper scope distance marks will solely be 100% correct at an FOV of round 80. As lengthy as you might be okay with this, set the FOV as excessive or low as you’d like, as a result of it seems that any efficiency influence referring to FOV is negligible.
• Colour Blind Mode – modifies most friend-or-foe colors for simpler identification.
  • No impact on body charge.
• V-Sync – controls the trade-off between display screen “tearing” and enter lag.
  • We’re conscious that some gamers are significantly delicate to display screen tearing and so this recommendation might not go well with everybody, however if you wish to carry out nicely on this game you then in all probability ought to set the V-Sync setting to Disabled, to minimise enter lag (the time between you as a participant appearing and the game responding to your motion).
• Adaptive Resolution FPS Target – dynamically lowers rendering decision to attempt to preserve the required body charge.
  • In an identical method to altering your base decision, that is an efficient setting to regulate if all you care about is getting above a sure body charge, nevertheless it’ll make your visuals considerably blurrier and never almost as sharp as you want them to be. Again we’d advise leaving this feature alone except you haven’t any different alternative.
• Adaptive Supersampling – dynamically raises rendering decision if the game is operating sooner than the goal body charge.
  • If you’re on the lookout for excessive efficiency, you need to maintain this setting disabled. Adaptive supersampling is for PCs nicely above and past the really helpful settings for Apex Legends.
• Anti-Aliasing – smooths the picture, lowering jagged strains and sparkles.
  • AA is beneficial for smoothing out objects significantly at distance, which may be very helpful in a battle royale whenever you’re scouting for enemies on the horizon. This means you need to put Anti-Aliasing solely simply above the Resolution choices by way of getting your required frames. You don’t need to eliminate AA except you haven’t any different alternative.
• Texture Streaming Budget – controls the quantity of reminiscence reserved for texture streaming.
  • Rather properly, Apex Legends will warn you for those who attempt to set a texture streaming finances above the precise VRAM in your system. This apart, for those who’re seeking to max your FPS you’ll be setting your texture choices to low anyway, so you’ll be able to be happy to show the finances all the way down to Very Low (2GB VRAM).
• Texture Filtering – controls the sharpness of floor particulars.
  • The Anisotropic Filtering choices will typically eat away at your frames, so for those who’re on the lookout for a fast and simple technique to acquire a possible 20%+ increase in FPS, set this all the way down to Bilinear.
• Ambient Occlusion Quality – controls the render goal decision used for display screen house ambient occlusion.
  • Changing Ambient Occlusion from High to Disabled gives a good larger body charge profit than the earlier merchandise on this listing.
• Sun Shadow Coverage – controls the protection of shadows from the solar.
  • I discover all these Shadow and Lighting choices to supply such a negligible enchancment to the visuals relative to what number of frames per second you’ll be able to acquire just by switching all of them off. The shadows nonetheless exist, and so they might look a tiny bit much less engaging than earlier than, however I don’t plan to spend a lot time gazing at shadows whereas taking part in anyway.
• Sun Shadow Detail – controls how detailed shadows are from the solar.
  • See above.
• Spot Shadow Detail – controls how detailed shadows are from lights within the atmosphere.
  • See above.
• Volumetric Lighting – controls whether or not sunbeams are enabled to simulate mild scattering within the air.
  • See above.
• Dynamic Spot Shadows – controls whether or not lights within the atmosphere can transfer.
  • See above.
• Model Detail – controls how detailed objects and legends are.
  • Model Detail has surprisingly little bearing in your body charge. You can anticipate maybe a 1% change both approach from High to Medium and Medium to Low. So you would possibly as nicely depart it at High, actually.
• Effects Detail – controls how detailed visible results like explosions are.
  • Effects Detail methods you into considering it doesn’t supply a lot of a profit to enhancing your body charge whenever you’re testing it, however that’s as a result of all the results arrive within the midst of a struggle, with grenade explosions and muzzle flashes and bullet tracers flying each which approach. And these are the moments the place you want your body charge to be rock stable. So set this to Low for those who can abdomen it, and Medium if not.
• Impact Marks – controls the place and what number of influence marks present up.
  • All you’re dropping from disabling Impact Marks is the power to see the bullet holes within the objects and terrain that you just shoot at. On the opposite hand, you gained’t see a lot of a rise in efficiency by disabling it, so… I don’t know, you select.
• Ragdolls – controls how bodily correct the useless physique animations are.
  • If Ragdoll accuracy is about to High then it’s possible you’ll sometimes lag (relying in your system) whenever you kill an enemy (or if somebody dies close by). So except you actually, actually need your corpses to break down onto the terrain in simply the fitting approach, then be happy to set this feature as little as potential.

Apex Legends lag repair

One frequent subject which in a short time made itself recognized shortly after Apex Legends’ launch was that a big minority of gamers have been reaching a far worse body charge than anticipated even on the lowest settings. This occurred to me, the truth is, once I put in Apex Legends on my laptop computer. Even on the bottom settings and having set the decision to 1280×720, I nonetheless was solely reaching about 15 FPS.

I’m not going to vow that this easy repair will resolve every part, as a result of possibly one thing totally different is occurring to you and your system than what occurred to me. But that is what labored for me and an ideal many different gamers. The directions beneath are for Windows 10 programs:

1. Close Apex Legends, hit your Windows key, and begin typing “Graphics Settings”. Once the Graphics Settings possibility seems on the high of the window, choose it. This will open a brand new window.
2. Under the dropdown bar beneath “Choose an app to set preference”, choose “Classic App”, after which click on “Browse”.
3. Navigate to the .exe file for Apex Legends, which you need to discover beneath Program Files (or Program Files x86) -> Origin Games. Select the .exe file after you have discovered it.
4. Now click on on the Apex Legends part which has appeared beneath the “Browse” button, and choose “Options”. This will open a brand new window.
5. In this new window, set the graphics desire to “High Performance”; then click on “Save”, and give up out of the opposite window.

Turns out by default Apex tries to make use of the built-in grpahics on any system it could lay its palms on, which turned out to be the reason for an ideal many gamers’ lag and stutter points. If you adopted the above steps, you need to now be capable to relaunch Apex Legends and revel in a relatively far smoother trip into the depths of King’s Canyon!

Show FPS and Ping (Data Center) in Apex Legends

There are two methods to show your FPS whereas taking part in Apex Legends, and each contain Origin settings. The first methodology is utilizing the Origin overlay: whereas in-game, merely hit “SHIFT”+”F1” to deliver up the Origin in-game overlay. Then beneath “Settings” within the “Origin In-Game” tab, scroll to the underside and also you’ll discover a dropdown referred to as “Display FPS Counter”. Using this you’ll be able to show your present body charge in any nook of the display screen, in addition to the window’s dimension and transparency.

The second methodology is to go to Apex Legends in your Origin game library, and click on on the cog icon subsequent to “Play”. Click “Game Properties”, then within the “Advanced Launch Options” tab, sort into the command line arguments field: “+cl_showfps 4”. Then save and run Apex Legends. During matches, you’ll see each your present FPS and your Frame MS information within the top-left nook.

As for Ping, nicely, sadly till Respawn updates their game, the one approach of seeing your connection to the Apex Legends servers is quite user-unfriendly. What it’s essential do is sit within the Main Menu of Apex Legends till it decides you might be AFK (away-from-keyboard), at which level you’ll be introduced as soon as extra with the opening splash display screen. Click “Exit to Desktop” within the bottom-left, however then click on “Cancel” to again out of this.

Once you’ve cancelled, you need to see a brand new possibility referred to as “Data Center” on the backside of the display screen. Click on this, and also you’ll be introduced with an inventory of all of the servers you’ll be able to connect with in Apex Legends. In this window you’ll be capable to see each your Ping and your Packet Loss % for every server. Look for the closest server to your location, and also you’ll be capable to see your Ping.

That’s every part we’ve to supply on Apex Legends settings and efficiency, so hopefully now you’ve obtained a handful extra methods up your sleeve close to eeking out as many frames as you’ll be able to out of your system. Take care, and see you in King’s Canyon. I’ll be the one on the horizon that appears like an anti-aliasing glitch.