PEDOT:PSS

From Wikipedia, the free encyclopedia
PEDOT:PSS
Electrochromic switching in two PEDOT:PSS electrodes connected by a piece of PhastGel SDS buffer strips. The electrodes were reversibly and repeatedly oxidized and reduced by switching the polarity of an applied 1 V potential. This was observed by a color change between dark (reduced PEDOT) and light (oxidized PEDOT) blue within the electrodes, demonstrating the transport of ions between and into the electrodes.[1]

poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) is a polymer mixture of two ionomers. One component in this mixture is made up of polystyrene sulfonate which is a sulfonated polystyrene. Part of the sulfonyl groups are deprotonated and carry a negative charge. The other component poly(3,4-ethylenedioxythiophene) (PEDOT) is a conjugated polymer and carries positive charges and is based on polythiophene. Together the charged macromolecules form a macromolecular salt.[2]

Synthesis[edit]

PEDOT:PSS can be prepared by mixing an aqueous solution of PSS with EDOT monomer, and to the resulting mixture, a solution of sodium persulfate and ferric sulfate.[3][4]

Applications[edit]

PEDOT:PSS has the highest efficiency among conductive organic thermoelectric materials (ZT~0.42) and thus can be used in flexible and biodegradable thermoelectric generators.[5] Yet its largest application is as a transparent, conductive polymer with high ductility. For example, AGFA coats 200 million photographic films per year[citation needed] with a thin, extensively-stretched layer of virtually transparent and colorless PEDOT:PSS as an antistatic agent to prevent electrostatic discharges during production and normal film use, independent of humidity conditions, and as electrolyte in polymer electrolytic capacitors.[clarification needed]

If organic compounds, including high boiling solvents like methylpyrrolidone, dimethyl sulfoxide, sorbitol, ionic liquids and surfactants, are added conductivity increases by many orders of magnitude.[6][7][8][9][10] This makes it also suitable as a transparent electrode, for example in touchscreens, organic light-emitting diodes,[11] flexible organic solar cells[12][13] and electronic paper to replace the traditionally used indium tin oxide (ITO). Owing to the high conductivity (up to 4600 S/cm),[14] it can be used as a cathode material in capacitors replacing manganese dioxide or liquid electrolytes. It is also used in organic electrochemical transistors.

The conductivity of PEDOT:PSS can also be significantly improved by a post-treatment with various compounds, such as ethylene glycol, dimethyl sulfoxide (DMSO), salts, zwitterions, cosolvents, acids, alcohols, phenol, geminal diols and amphiphilic fluoro-compounds.[15][16][17][18][19] This conductivity is comparable to that of ITO, the popular transparent electrode material, and it can triple that of ITO after a network of carbon nanotubes and silver nanowires is embedded into PEDOT:PSS[20] and used for flexible organic devices.[21]

PEDOT:PSS is generally applied as a dispersion of gelled particles in water. A conductive layer on glass is obtained by spreading a layer of the dispersion on the surface usually by spin coating and driving out the water by heat. Special PEDOT:PSS inks and formulations were developed for different coating and printing processes. Water-based PEDOT:PSS inks are mainly used in slot die coating, flexography, rotogravure and inkjet printing. If a high viscous paste and slow drying is required like in screen-printing processes PEDOT:PSS can also be supplied in high boiling solvents like propanediol. Dry PEDOT:PSS pellets can be produced with a freeze drying method which are redispersable in water and different solvents, for example ethanol to increase drying speed during printing. Finally, to overcome degradation to ultraviolet light and high temperature or humidity conditions PEDOT:PSS UV-stabilizers are available. Linköping University claim to have made a "wooden transistor" by replacing the lignin from balsawood with PEDOT:PSS[22]

Mechanical Properties[edit]

Since PEDOT:PSS is most frequently used in thin film architectures, several methods have been developed to accurately probe its mechanical properties; for example, water-supported tensile testing, four-point bend tests to measure adhesive and cohesive fracture energy, buckling tests to measure modulus, and bending tests on PDMS and polyethylene supports to probe the crack onset strain.[23] Though PEDOT:PSS has a lower electrical mobility than silicon, which can also be incorporated into flexible electronics through the incorporation of stress-relief structures, sufficiently flexible PEDOT:PSS can enable lower cost-processing, such as roll-to-roll processing.[24] The most important characteristics for an organic semiconductor used in thin-film architectures are low modulus in the elastic regime and high stretchability prior to fracture.[24] These properties have been found to be highly correlated to relative humidity.[25] At high relative humidity (>40%) hydrogen bonds are weakened in the PSS due to the uptake of water which leads to higher strain before fracture and lower elastic modulus. At low relative humidity (<23%) the presence of strong bonding between PSS grains leads to higher modulus and lower strain before fracture. Films at higher relative humidity are presumed to fail by intergranular fracture, whereas lower relative humidity leads to transgranular fracture. Additives like 3-glycidoxypropyltrimethoxysilane (GOPS) can drastically improve the mechanical stability in aqueous media even at low concentrations of 1 wt% without significantly impeding the electrical properties.[26]

PEDOT:PSS can also show self-healing properties if submerged in water after sustaining mechanical damage.[27] This self-healing capability is proposed to be enabled by the hygroscopic property of PSS−.[28] Common PEDOT:PSS additives that improve the electrical conductivity have varying effects on self-healing. While ethylene glycol improves electrical and mechanical self-healing, sulfuric acid reduces the former but improves the latter, presumably because it undergoes autoprotolysis. Polyethylene glycol improves the electrical and thermoelectric self-healing, but reduces the mechanical self-healing.[28]

PEDOT:PSS is also attractive for conductive textile applications. Though it results in inferior thermoelectric properties, wet-spinning has been shown to result in high conductivity and stiff fibers due to preferential alignment of polymer chains during fiber drawing.[29]

References[edit]

  1. ^ Bengtsson K, Nilsson S, Robinson N (2014). "Conducting Polymer Electrodes for Gel Electrophoresis". PLOS ONE. 9 (2): e89416. Bibcode:2014PLoSO...989416B. doi:10.1371/journal.pone.0089416. PMC 3929695. PMID 24586761.
  2. ^ Groenendaal, L.; Jonas, F.; Freitag, D.; Pielartzik, H.; Reynolds, J. R. (2000). "Poly(3,4-ethylenedioxythiophene) and Its Derivatives: Past, Present, and Future". Advanced Materials. 12 (7): 481–494. doi:10.1002/(SICI)1521-4095(200004)12:7<481::AID-ADMA481>3.0.CO;2-C.
  3. ^ Geoghegan, Mark; Hadziioannou, Georges (2013). Polymer electronics (First ed.). Oxford: Oxford University Press. p. 125. ISBN 9780199533824.
  4. ^ Yoo, Dohyuk; Kim, Jeonghun; Kim, Jung Hyun (2014). "Direct synthesis of highly conductive poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS)/graphene composites and their applications in energy harvesting systems" (PDF). Nano Research. 7 (5): 717–730. doi:10.1007/s12274-014-0433-z. S2CID 95642579. Retrieved 31 August 2017.
  5. ^ Satoh, Norifusa; Otsuka, Masaji; Ohki, Tomoko; Ohi, Akihiko; Sakurai, Yasuaki; Yamashita, Yukihiko; Mori, Takao (2018). "Organic π-type thermoelectric module supported by photolithographic mold: A working hypothesis of sticky thermoelectric materials". Science and Technology of Advanced Materials. 19 (1): 517–525. Bibcode:2018STAdM..19..517S. doi:10.1080/14686996.2018.1487239. PMC 6052422. PMID 30034560.
  6. ^ Kim, Yong Hyun; Sachse, Christoph; Machala, Michael L.; May, Christian; Müller-Meskamp, Lars; Leo, Karl (2011-03-22). "Highly Conductive PEDOT:PSS Electrode with Optimized Solvent and Thermal Post-Treatment for ITO-Free Organic Solar Cells". Advanced Functional Materials. 21 (6): 1076–1081. doi:10.1002/adfm.201002290. S2CID 136583700.
  7. ^ Kim, J. Y.; Jung, J. H.; Lee, D. E.; Joo, J. (2002). "Enhancement of electrical conductivity of poly(3,4-ethylenedioxythiophene)/poly(4-styrenesulfonate) by a change of solvents". Synthetic Metals. 126 (2–3): 311–316. doi:10.1016/S0379-6779(01)00576-8.
  8. ^ Ouyang, J.; Xu, Q.; Chu, C. W.; Yang, Y.; Li, G.; Shinar, J. (2004). "On the mechanism of conductivity enhancement in poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) film through solvent treatment". Polymer. 45 (25): 8443–8450. doi:10.1016/j.polymer.2004.10.001.
  9. ^ Döbbelin, M.; Marcilla, R.; Salsamendi, M.; Pozo-Gonzalo, C.; Carrasco, P. M.; Pomposo, J. A.; Mecerreyes, D. (2007). "Influence of Ionic Liquids on the Electrical Conductivity and Morphology of PEDOT:PSS Films". Chemistry of Materials. 19 (9): 2147–2149. doi:10.1021/cm070398z.
  10. ^ Xia, Y; Ouyang, J (2010). "Significant conductivity enhancement of conductive poly(3,4-ethylenedioxythiophene): Poly(styrenesulfonate) films through a treatment with organic carboxylic acids and inorganic acids". ACS Applied Materials & Interfaces. 2 (2): 474–83. doi:10.1021/am900708x. PMID 20356194.
  11. ^ Kim, Yong Hyun; Lee, Jonghee; Hofmann, Simone; Gather, Malte C.; Müller-Meskamp, Lars; Leo, Karl (2013). "Achieving High Efficiency and Improved Stability in ITO-Free Transparent Organic Light-Emitting Diodes with Conductive Polymer Electrodes". Advanced Functional Materials. 23 (30): 3763–3769. doi:10.1002/adfm.201203449. S2CID 137196552.
  12. ^ Park, Yoonseok; Berger, Jana; Tang, Zheng; Müller-Meskamp, Lars; Lasagni, Andrés Fabián; Vandewal, Koen; Leo, Karl (2016). "Flexible, light trapping substrates for organic photovoltaics". Applied Physics Letters. 109 (9): 093301. Bibcode:2016ApPhL.109i3301P. doi:10.1063/1.4962206.
  13. ^ Park, Yoonseok; Nehm, Frederik; Müller-Meskamp, Lars; Vandewal, Koen; Leo, Karl (2016). "Optical display film as flexible and light trapping substrate for organic photovoltaics". Optics Express. 24 (10): A974-80. Bibcode:2016OExpr..24A.974P. doi:10.1364/OE.24.00A974. PMID 27409970.
  14. ^ Worfolk, Brian J.; Andrews, Sean C.; Park, Steve; Reinspach, Julia; Liu, Nan; Toney, Michael F.; Mannsfeld, Stefan C. B.; Bao, Zhenan (2015-11-17). "Ultrahigh electrical conductivity in solution-sheared polymeric transparent films". Proceedings of the National Academy of Sciences. 112 (46): 14138–14143. Bibcode:2015PNAS..11214138W. doi:10.1073/pnas.1509958112. PMC 4655535. PMID 26515096.
  15. ^ Bießmann, Lorenz; Kreuzer, Lucas Philipp; Widmann, Tobias; Hohn, Nuri; Moulin, Jean-François; Müller-Buschbaum, Peter (2018-03-21). "Monitoring the Swelling Behavior of PEDOT:PSS Electrodes under High Humidity Conditions". ACS Applied Materials & Interfaces. 10 (11): 9865–9872. doi:10.1021/acsami.8b00446. ISSN 1944-8244. PMID 29484879.
  16. ^ Ouyang, J.; Chu, C. -W.; Chen, F. -C.; Xu, Q.; Yang, Y. (2005). "High-Conductivity Poly(3,4-ethylenedioxythiophene):Poly(styrene sulfonate) Film and Its Application in Polymer Optoelectronic Devices". Advanced Functional Materials. 15 (2): 203–208. doi:10.1002/adfm.200400016. S2CID 95522337.
  17. ^ Saghaei, Jaber; Fallahzadeh, Ali; Saghaei, Tayebeh (2015). "ITO-free organic solar cells using highly conductive phenol-treated PEDOT:PSS anodes". Organic Electronics. 24: 188–194. doi:10.1016/j.orgel.2015.06.002.
  18. ^ Fallahzadeh, Ali; Saghaei, Jaber; Yousefi, Mohammad Hassan (2014). "Effect of alcohol vapor treatment on electrical and optical properties of poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) films for indium tin oxide-free organic light-emitting diodes". Applied Surface Science. 320: 895–900. Bibcode:2014ApSS..320..895F. doi:10.1016/j.apsusc.2014.09.143.
  19. ^ Saghaei, Jaber; Fallahzadeh, Ali; Yousefi, Mohammad Hassan (2015). "Improvement of electrical conductivity of PEDOT:PSS films by 2-Methylimidazole post treatment". Organic Electronics. 19: 70–75. doi:10.1016/j.orgel.2015.01.026.
  20. ^ Stapleton, A. J.; Yambem, S. D.; Johns, A. H.; Afre, R. A.; Ellis, A. V.; Shapter, J. G.; Andersson, G. G.; Quinton, J. S.; Burn, P. L.; Meredith, P.; Lewis, D. A. (2015). "Planar silver nanowire, carbon nanotube and PEDOT:PSS nanocomposite transparent electrodes". Science and Technology of Advanced Materials. 16 (2): 025002. Bibcode:2015STAdM..16b5002S. doi:10.1088/1468-6996/16/2/025002. PMC 5036479. PMID 27877771.
  21. ^ Entifar, Siti Aisyah Nurmaulia; Han, Joo Won; Lee, Dong Jin; Ramadhan, Zeno Rizqi; Hong, Juhee; Kang, Moon Hee; Kim, Soyeon; Lim, Dongchan; Yun, Changhun; Kim, Yong Hyun (2019). "Simultaneously enhanced optical, electrical, and mechanical properties of highly stretchable transparent silver nanowire electrodes using organic surface modifier". Science and Technology of Advanced Materials. 20 (1): 116–123. Bibcode:2019STAdM..20..116E. doi:10.1080/14686996.2019.1568750. PMC 6383608. PMID 30815043.
  22. ^ LU News:The world’s first wood transistor28 April 2023
  23. ^ Lipomi, Darren J.; Bao, Zhenan (2017-02-02). "Stretchable and ultraflexible organic electronics". MRS Bulletin. 42 (2): 93–97. Bibcode:2017MRSBu..42...93L. doi:10.1557/mrs.2016.325. ISSN 0883-7694.
  24. ^ a b Root, Samuel E.; Savagatrup, Suchol; Printz, Adam D.; Rodriquez, Daniel; Lipomi, Darren J. (2017-03-25). "Mechanical Properties of Organic Semiconductors for Stretchable, Highly Flexible, and Mechanically Robust Electronics". Chemical Reviews. 117 (9): 6467–6499. doi:10.1021/acs.chemrev.7b00003. ISSN 0009-2665. PMID 28343389.
  25. ^ Lang, Udo; Naujoks, Nicola; Dual, Jurg (2008-12-30). "Mechanical characterization of PEDOT:PSS thin films". Synthetic Metals. 159 (5–6): 473–479. doi:10.1016/j.synthmet.2008.11.005. ISSN 0379-6779.
  26. ^ ElMahmoudy, Mohammed; Inal, Sahika; Charrier, Anne; Uguz, Ilke; Malliaras, George G.; Sanaur, Sébastien (2017-02-20). "Tailoring the Electrochemical and Mechanical Properties of PEDOT:PSS Films for Bioelectronics". Macromolecular Materials and Engineering. 302 (5): 1600497. doi:10.1002/mame.201600497. hdl:10754/623061. ISSN 1438-7492. S2CID 136269465.
  27. ^ Zhang, Shiming; Cicoira, Fabio (2017-08-28). "Self-Healing: Water-Enabled Healing of Conducting Polymer Films (Adv. Mater. 40/2017)". Advanced Materials. 29 (40). doi:10.1002/adma.201770291. ISSN 0935-9648.
  28. ^ a b Xin, Xing; Xue, Zexu; Gao, Nan; Yu, Jiarui; Liu, Hongtao; Zhang, Wenna; Xu, Jingkun; Chen, Shuai (October 2020). "Effects of conductivity-enhancement reagents on self-healing properties of PEDOT:PSS films". Synthetic Metals. 268: 116503. doi:10.1016/j.synthmet.2020.116503. ISSN 0379-6779. S2CID 224922736.
  29. ^ Sarabia-Riquelme, Ruben; Shahi, Maryam; Brill, Joseph W.; Weisenberger, Matthew C. (2019-07-08). "Effect of Drawing on the Electrical, Thermoelectrical, and Mechanical Properties of Wet-Spun PEDOT:PSS Fibers". ACS Applied Polymer Materials. 1 (8): 2157–2167. doi:10.1021/acsapm.9b00425. ISSN 2637-6105. S2CID 199176952.
Retrieved from "https://en.wikipedia.org/w/index.php?title=PEDOT:PSS&oldid=1213436841"